Order the latest products from the TI store

Current and power measurement for automotive designs

The TPS61322x family is the industry’s first low VIN, low IQ synchronous boost converter that can support 0.5A output current. This device is in a SOT23 package and needs only three external components, so it helps to saves PCB area and BOM cost in a wide variety of systems.

Just one click to your 16-cell HEV/EV active balance solution

This 16-channel active balance reference design combines the high integration and accuracy of the bq76PL455A-Q1 with a bidirectional DC/DC cell balancer to create a high-performance battery management solution for large capacity battery packs. • Charge or discharge any of 16 cell inputs as needed up to 5A • Stack modules up to 1300V

Choose your devices to get started today.

Break the speed barrier with LMG1210 GaN driver

Breaking the speed barrier of your power design is now possible. Our new GaN half-bridge driver, LMG1210 enables designs at any speed (even up to 50MHz) with integrated dead time capability for 5x smaller DC/DC converters. This device is in an easy-to-use QFN package for a wide range of high-frequency applications such as Class-D audio amplifiers and Class-E wireless charging.

Meet LMG1020, the fastest GaN driver

GaN delivers sub-nanosecond pulses for LiDAR. Imagine if we could equip our technology with the highest resolution LiDAR vision. Our new LMG1020, a low-side GaN driver, makes it possible. This 5V GaN driver is the only driver capable of sub-nanosecond laser pulses for high-definition LiDAR laser diodes in the industry’s smallest package size.

Achieve true 6A performance with ultra-small 5.5V step-down power module

TI’s new synchronous step-down power module delivers continuous 6A output current with up to 93% efficiency for space- and height-constrained point-of-load power supplies. The TPSM82480 DC/DC converter offers an optional automatic power-save mode to maintain high efficiency across the full-load range. In addition, it features adjustable soft start, VSEL to support multiple processor stages and a power-good indicator.

Are you still using a discrete switch?

Load switches can be designed with MOSFETs, resistors, and capacitors, but a fully integrated solution offers several benefits over these discrete components. TI has a broad power load switch portfolio that offers multiple benefits for a variety of applications. Upgrade to an integrated solution today with devices such as the TPS22916, TPS22971, TPS22965-Q1, and TPS22918-Q1.

TI’s next-generation Wide VIN buck controller

The LM25145 synchronous buck controller brings you the latest in feature set and package technology for high-current applications requiring up to 42V input. RDS(on) current sensing, 40ns minimum on-time, and wettable flanks packaging are just a few features that you can leverage to upgrade your Wide VIN buck controller design and squeeze more performance out of your power supply.

The smallest and most efficient SIMPLE SWITCHER® ever

SIMPLE SWITCHER® has been making switching regulator design easy for the better part of three decades. Today, we introduce the smallest and most efficient SIMPLE SWITCHER regulator ever. The 36V, 2A/3A LMR33620 / 30 comes in a familiar 8-pin SOIC or tiny 2mm x 3mm HotRod™ WSON with wettable flanks. Shrinking your converter solution size has never been so simple.

Meet TI’s most popular 3/4 pin 1.5A adjustable positive voltage regulator

The LM317 is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output-voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% and typical load regulation of 0.1%. It includes current limiting and safe operating area protection.

SIMPLE SWITCHER® 4.5V to 40V, 3A low component count step-down regulator

The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version.